Raymarine forum / Raymarine Forums / Autopilots v / P70

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
P70
12-15-16, 01:47 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: P70
Welcome to the Raymarine Forum bfiegener,

Q: Can I connect the p70 using part number A06047 and plugging the seatalk 1 end into a D244 connector along with the seatalk 1 cable that is already run up the pedestal guard to my st6002?

A: As the p70, p70R, p70S, and p70RS Evolution Autopilot Control Heads are designed to support either SeaTalk or SeaTalkng communications (but not both simultaneously), it is indeed possible to use the A06047 SeaTalk Adapter Cable to interface any one of these Evolution Autopilot Control Heads to your SeaTalk bus in the manner which you have suggested.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
P70 - bfiegener - 12-14-16, 10:03 PM
RE: P70 - Chuck - Raymarine - Moderator - 12-15-16 01:47 PM
RE: P70 - bfiegener - 01-14-17, 03:01 PM
RE: P70 - Chuck - Raymarine - Moderator - 01-16-17, 10:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication