Downvision Transducers
|
01-23-17, 09:28 AM
(This post was last modified: 01-23-17 09:40 AM by Chuck - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
RE: Downvision Transducers
Reel Overtime,
Please click here to view a FAQ addressing why you may be loosing bottom and how you may be able to correct the problem. The ax8 MFDs, eSx8 MFDs, and CP100 CHIRP (conical) sonar / DownVision Sonar each feature both CHIRP (conical) fishfinder sonar processing circuitry and DownVision fishfinder sonar processing circuitry. The CPT-S transducers are exclusively designed to support CHIRP (conical) fishfinder sonar imaging within the above listed products. Should one desire DownVision fishfinder sonar imaging, then a compatible CHIRP/DownVision fishfinder transducer would need to be installed. The image below shows the imaging produced by both CHIRP (conical) fishfinder sonar (upper FF pane) and DownVision Fishfinder sonar (lower FF pane). Please see my prior response addressing the advantage of each of these features. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Downvision Transducers - landonshaw - 01-20-17, 03:48 PM
RE: Downvision Transducers - Chuck - Raymarine - Moderator - 01-20-17, 04:05 PM
RE: Downvision Transducers - Reel Overtime - 01-23-17, 09:00 AM
RE: Downvision Transducers - Chuck - Raymarine - Moderator - 01-23-17 09:28 AM
RE: Downvision Transducers - Reel Overtime - 01-23-17, 09:38 AM
RE: Downvision Transducers - Chuck - Raymarine - Moderator - 01-23-17, 09:48 AM
RE: Downvision Transducers - Reel Overtime - 01-23-17, 09:56 AM
RE: Downvision Transducers - Chuck - Raymarine - Moderator - 01-23-17, 09:58 AM
|
User(s) browsing this thread: 1 Guest(s)