Raymarine forum / Raymarine Forums / Fishfinders v / Multiple Transducers

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multiple Transducers
02-03-17, 11:26 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Multiple Transducers
Welcome to the Raymarine Forum Gamefish,

Is it not possible to connect both the new CPT-S thru-hull and CPT-100 directly to an eS98 MFD. Should both of these transducers be desired to be used within the system, then it would be recommended that a CP100 CHIRP/DownVision Sounder Module be interfaced to the system, and that the CPT-S transducer then be mated to the CP100. The MFD may then be configured to display DownVision sonar imagery via it's own internal CHIRP/DownVision fishfinder circuitry and that it display CHIRP (conical) sonar from the CP100.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Multiple Transducers - Gamefish - 02-03-17, 07:19 AM
RE: Multiple Transducers - Chuck - Raymarine - Moderator - 02-03-17 11:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication