The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Autopilot Application SPX10 vs SPX30

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autopilot Application SPX10 vs SPX30
03-02-17, 11:09 PM
Post: #1
Taylor7000 Offline
Junior Member
**
 		Posts: 6
Joined: Feb 2016
Reputation: 0
Autopilot Application SPX10 vs SPX30
Can I replace my SPX30 with an SPX10? I have a type 2 long actuator and the sailboat is 15 tons. If the integrated solenoids will not handle the current I can use external relays so that the current is very low. The main reason is cost. I already have the relays. Looks to me that the only difference in the two is the load capability of the actuator relays. There is input for the rudder reference and fluxgate compass. I assume that the course keeping ability is the same. Comments please...........
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Autopilot Application SPX10 vs SPX30 - Taylor7000 - 03-02-17 11:09 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication