Adding AIS650 to existing NMEA0183 Network

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Adding AIS650 to existing NMEA0183 Network

03-09-17, 11:33 AM (This post was last modified: 03-09-17 11:34 AM by Chuck - Raymarine - Moderator.)

Post: #8

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: Adding AIS650 to existing NMEA0183 Network

Bruce,

As autopilot course computers are not designed to be full NMEA 0183 to SeaTalk data bridging devices, it is not recommended that you do as suggested. It is recommended that the equipment be interfaced as had been previously recommended.

« Next Oldest | Next Newest »

Messages In This Thread

Adding AIS650 to existing NMEA0183 Network - bbayne - 06-11-16, 11:32 AM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 06-24-16, 07:32 AM

RE: Adding AIS650 to existing NMEA0183 Network - bbayne - 06-30-16, 07:19 AM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 06-30-16, 08:17 AM

RE: Adding AIS650 to existing NMEA0183 Network - bbayne - 03-05-17, 12:03 PM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 03-06-17, 12:04 PM

RE: Adding AIS650 to existing NMEA0183 Network - bbayne - 03-06-17, 12:25 PM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 03-09-17 11:33 AM

User(s) browsing this thread: 1 Guest(s)