Raymarine forum / Raymarine Forums / Autopilots v / Installation of EV-1, ACU-200

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Installation of EV-1, ACU-200
03-09-17, 03:10 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Installation of EV-1, ACU-200
Welcome to the Raymarine Forum Utahsailor,

Please click here to view a FAQ addressing this subject. Should you be detecting RF noise being emitted from the ACU-200 (heard is RF noise within your VHF radio or marine stereo system), then it would be recommended that the ACU-200's ground terminal be connected to bonding cable to eliminate the RF noise. Otherwise the connection to between the ACU-200 and the vessel's bonding cable may be made when it is convenient to do so.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Installation of EV-1, ACU-200 - Chuck - Raymarine - Moderator - 03-09-17 03:10 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication