Raymarine forum / Raymarine Forums / Multifunction Displays v / updating a 2000 380 Sundancer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
updating a 2000 380 Sundancer
03-09-17, 05:05 PM (This post was last modified: 03-09-17 05:06 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: updating a 2000 380 Sundancer
Welcome to the Raymarine Forum Dave,

Please note that the E80 MFDs were retired several years ago and are quickly nearing the point that Raymarine's Product Repair Center will no longer be able to service them. Compatible chart cards are also becoming a bit challenging to located for these MFDs. Is there a particular reason why you have selected an E80 for this applications? In order to specify whether the currently installed transducer may be used with Raymarine products, we will need to know what the currently installed transducer is or had been previously interfaced to.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
updating a 2000 380 Sundancer - DaveG - 03-09-17, 01:36 PM
RE: updating a 2000 380 Sundancer - Chuck - Raymarine - Moderator - 03-09-17 05:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication