Raymarine forum / Raymarine Forums / Networking / System Integration v / Networking MFD e97 to SmartPilot X-5 via Seatalkng Problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Networking MFD e97 to SmartPilot X-5 via Seatalkng Problem
03-21-17, 10:01 AM (This post was last modified: 03-21-17 10:02 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Networking MFD e97 to SmartPilot X-5 via Seatalkng Problem
Welcome to the Raymarine Forum sailrj,

SeaTalkng / NMEA 2000 devices are each designed to be interfaced as spurs to a powered and properly terminated SeaTalkng backbone rather than as you have indicated. Additionally, Raymarine's X-Series autopilots are not designed to function as complete SeaTalk to SeaTalkng data bridging devices. Accordingly, it is recommended that the SeaTalk bus be disconnected from the X5 and that it instead be interfaced to a SeaTalk to SeaTalkng Converter(s) which will be installed as a backbone component within the backbone which will be installed. Please click here to view a FAQ addressing how to interface products having a SeaTalk interface to a SeaTalkng backbone, to which the Data Master MFD and SPX5 will also be interfaced. Following installation, it is recommended that the SPX5 and SeaTalk to SeaTalkng Converter each be updated with the latest available Raymarine product software updates.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Networking MFD e97 to SmartPilot X-5 via Seatalkng Problem - Chuck - Raymarine - Moderator - 03-21-17 10:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication