what is the purpose of the on/off button

[Chuck - Raymarine - Moderator]

Steve,

The Wi-Fish is switched OFF by holding its POWER button pressed for approximately seven seconds. When switched OFF via its POWER button, the Wi-Fish's Wi-Fi and Status LEDs will each no longer be illuminated. Switching the Wi-Fish OFF will cause the Wi-Fish to remain OFF until the Wi-Fish's POWER button is pressed or the circuit supplying power to the Wi-Fish is switched OFF and then ON again. Should one desire that the Wi-Fish not be powered ON when the circuit supplying power to the Wi-Fish is switched ON, then it is recommended that an ON/OFF switch be installed within the circuit supplying the Wi-Fish with power.