[CA] [CA11] SeaTalk hs switch with axiom pro

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum Never II Nauti,

Q1. would not have a need for a backbone
A1. This may or may not be so. While it is true that a SeaTalkng / NMEA 2000 backbone would not be involved in interfacing the MFDs, radar transducer, Sirius Satellite Weather Receiver, and fishfinder transducer to the system, other compatible devices within the system which lack an Ethernet communications interface (ex. GPS sensor, autopilot, instruments, etc.) would typically need to be interfaced to a SeaTalkng / NMEA 2000 backbone which in turn would be interfaced to the system's Data Master MFD.

Q2. I understand that the sr100 is fully functional with the axiom pros.
A2. This is an incorrect statement. Axiom/Axiom Pro/Axiom XL MFDs are exclusively compatible with the SR200 and the SR150 which it had replaced.