Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Product selection help.
12-18-19, 03:05 PM (This post was last modified: 12-18-19 03:07 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Product selection help.
Welcome to the Raymarine Forum Carly,

I have never heard of an autopilot application in which two different types of autopilot drives had been installed. That said, should either a Type 1 Mechanical Linear Drive or Type 1 Mechanical Rotary Drive have been installed onboard and should the drive be operational, then it would be recommended that a T70155 EV-200 Sail System Pack be installed to replace the currently installed autopilot course computer, autopilot control head, and fluxgate compass. Please click here to view a FAQ addressing how a backbone which has been constructed from Raymarine NMEA 2000 networking components (SeaTalkng) to a NMEA 2000 backbone which has been constructed from third party NMEA 2000 networking component. As the software within Raymarine products cannot be update via a third party product it is strongly recommended that your dealer be instructed to verify that the Evolution autopilot's EV-1 CCU, ACU-200 actuator control unit, and p70S autopilot control head have been updated with the latest available Raymarine product software updates before delivering them to you. Please click here to view a FAQ addressing alternate means of updating the software within Raymarine products.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Product selection help. - Chuck - Raymarine - Moderator - 12-18-19 03:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)