Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] SeaTalk1 to NMEA 2000
01-06-20, 03:51 PM (This post was last modified: 01-06-20 04:22 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] SeaTalk1 to NMEA 2000
Thanks Tom,

That's a big help, I didn't realize the Seatalk 2 was a different standard.

For a number of reasons I need to use the NMEA 2000 Transponder to output over Wifi so the NMEA 2000 Network will be necessary and I may put in a 0183 multiplexer later to get the AIS data to the plotter.

Does this updated diagram look correct?

I'll use the SeaTalk 1 to 
SeaTalkng 
converter 
cable off the exiting Junction Block with no power to the NMEA 2000 Network or E22158.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-03-20, 06:41 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-06-20 03:51 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-07-20, 09:03 AM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-19-20, 06:46 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-20-20, 07:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)