The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] ST 6002 to Axiom Pro S

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST 6002 to Axiom Pro S
02-22-20, 11:35 AM (This post was last modified: 02-24-20 01:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
DKSAIL Offline
Junior Member
**
 		Posts: 2
Joined: Dec 2019
Reputation: 0
[CA11] ST 6002 to Axiom Pro S
Searched for similar threads, but still need confirmation...

My setup currently includes the S2 course computer that links to the ST 6002 Control head in my binnacle via Seatalk and then to my e120 MFD via seatalk.

I am now changing to the Axiom Pro 12S

Can I connect the ST 6002 control head to the powered Seatalk to STng converter? In doing this, I would disconnect the red power lead from the ST 6002 at the S2 course computer.

Or do I have to use the NEMA 0183 data connection from the Axiom Pro and connect it to the S2 course computer? In doing this, my ST 6002 would be a dead end.

Secondly, my ST60 instruments all connect to the S2 course computer. I assume that once the course computer has been connected to the Axiom Pro in one way or the other, the ST60's should be good?



Please confirm.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST 6002 to Axiom Pro S - DKSAIL - 02-22-20 11:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication