Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] i50 depth issues
05-01-20, 06:28 AM
Post: #2
RE: [DG11] i50 depth issues
Hi Sergel

Thank you for your enquiry.

Is the depth transducer connected to the itc-5 or to the i50 depth?

If the depth transducer is connected to the itc-5, then the i50 depth must be set to repeater mode for it to repeat the information from the itc-5.

If the depth transducer is connected to the i50 and it is set to MASTER mode, then look in the data sources feature in the MFD and ensure that the i50 is selected as the source of depth, even if it is, please select it again, this will trigger a broadcast of the correct source setting though out the network and should resolve the issue.


Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[DG11] i50 depth issues - Sergel - 04-30-20, 02:57 PM
RE: [DG11] i50 depth issues - Derek - Raymarine - Moderator - 05-01-20 06:28 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)