Adding AIS650 to existing NMEA0183 Network

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Adding AIS650 to existing NMEA0183 Network

06-11-16, 11:32 AM

Post: #1

bbayne Offline

Junior Member

Posts: 15
Joined: Feb 2016
Reputation: 0

Adding AIS650 to existing NMEA0183 Network

I currently have installed:

E80 Classic
125 GPS
S3G SmartPilot
SmartController
ST60 Speed, Depth, Wind
ST6001+
E55059 MUX
ICOM m422 VHF with DSC
FloScan 9500 with GPS interface

I am looking to install an AIS650 to this network. I've attached my current configuration including the AIS650. Can you please look this over and let me know if this is correct or what should change.

Thanks!

« Next Oldest | Next Newest »

Messages In This Thread

Adding AIS650 to existing NMEA0183 Network - bbayne - 06-11-16 11:32 AM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 06-24-16, 07:32 AM

RE: Adding AIS650 to existing NMEA0183 Network - bbayne - 06-30-16, 07:19 AM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 06-30-16, 08:17 AM

RE: Adding AIS650 to existing NMEA0183 Network - bbayne - 03-05-17, 12:03 PM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 03-06-17, 12:04 PM

RE: Adding AIS650 to existing NMEA0183 Network - bbayne - 03-06-17, 12:25 PM

RE: Adding AIS650 to existing NMEA0183 Network - Chuck - Raymarine - Moderator - 03-09-17, 11:33 AM

User(s) browsing this thread: 1 Guest(s)