The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [TG] [TG11] Smartpilot S1 and Axiom 9 RV

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Smartpilot S1 and Axiom 9 RV
05-09-20, 10:59 AM (This post was last modified: 05-13-20 01:37 AM by Tom - Raymarine - Moderator.)
Post: #1
unixdood Offline
Member
***
 		Posts: 87
Joined: Mar 2016
Reputation: 0
[TG11] Smartpilot S1 and Axiom 9 RV
My boat has the smartpilot S1 installed with the fluxgate, rudder position but the hydrolic motor is bad. I just upgraded to the Axiom 9rv.

I would like to know if the smartpilot with NO head can connect to the Axiom via nmea0183 or Seatalk 1 into my nmea2k backbone?

The reason for this question is I would rather replace the pump and use the axiom to control the autopilot instead of spending 2k on a replacement/upgraded autopilot.

so I guess its 2 questions

1 - Will the S1 interface with my axiom over nmea2k or ST1 and if so what cables will i need

2 - Can i run the S1 just with the Axiom 9rv or do I need a new head unit and if not which head units work with it

Thanks
Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Smartpilot S1 and Axiom 9 RV - unixdood - 05-09-20 10:59 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication