[TG] [TG11] safe transfer of logbook when replacing RC530
|
05-13-20, 10:39 PM
Post: #2
|
|||
|
|||
RE: [TG11] safe transfer of logbook when replacing RC530
Hello Sten,
My memory on Pathfinder systems is hazy now, it's been 15 years since I used one extensively, and I can't find any certain confirmation in the handbook, but no, I don't think there is any way to back up that log data outside the display itself. The Pathfinder displays could back up waypoints and routes over NMEA0183, Seatalk or HSB/HSB2, or to a C-Map User Card, but I know that the NMEA0183 and Seatalk data transfers won't include the Log data and I am 99% certain that the C-Map User Card backup wouldn't either (and that wouldn't help you anyway since the C-Map User Cards and USB card readers are, I suspect, no longer available and they weren't readable by standard computer software in order to allow you to extract data from them even if it were there). They only way that I think this data can be copied between displays is over HSB/HSB2 (as you have done) and that's rather a blind alley: no display made since Pathfinder was retired in 2004 has been able to read that very old network data. I would start transposing it manually, or at least taking photos of the screen whilst you have the data. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] safe transfer of logbook when replacing RC530 - sten - 05-11-20, 02:50 PM
RE: [TG11] safe transfer of logbook when replacing RC530 - Tom - Raymarine - Moderator - 05-13-20 10:39 PM
|
User(s) browsing this thread: 1 Guest(s)