The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C90W - Does not power up - buttons flash only
05-21-20, 09:02 AM
Post: #1
C90W - Does not power up - buttons flash only
My c90w will not power up, the screen does not turn on at all. When pressing the power button the buttons on the right will just flash 3 times.

I'm afraid I fried the thing as I now realize I was feeding it multiple power sources. I recently hooked the c90w to a ST60 via a Seatalk to SeaTalkNG adapter. The ST60 was receiving power via it's original power connection, and the c90w was getting power from it's own power source. This setup worked for a few weeks, and now it just flashes when the power button is pressed.

I tried unhooking the SeaTalkNG connection, but the behavior does not change.

I tried powering the c90w off a powered SeaTalkNG system and nothing happens at all in that configuration.

Any suggestions are much appreciated.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
C90W - Does not power up - buttons flash only - natesms - 05-21-20 09:02 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)