The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / [TG] [TG11] After Update to 3.1142 - Axiom 7 DV fails to boot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] After Update to 3.1142 - Axiom 7 DV fails to boot
05-28-20, 02:25 PM (This post was last modified: 06-05-20 02:02 AM by Tom - Raymarine - Moderator.)
Post: #1
schomakr Offline
Junior Member
**
 		Posts: 6
Joined: Jul 2018
Reputation: 0
[TG11] After Update to 3.1142 - Axiom 7 DV fails to boot
Hi -i tried to update my Axiom 7 DV to 3.11.42. When it rebooted - it went to the axiom flash screen - then the lighthouse screen then repeated this loop. Reading on the forums - it was recommended to do a erase / factory reset - which I did.

Now to goes from axiom flash screen to lighthouse screen multiple times. Eventually it gets to startup wizard step 1 with english selected. Once here touch screen does not allow selection. After 20 seconds or so - starts all over with axiom splash to lighthouse to startup wizard.

What are the next steps?

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] After Update to 3.1142 - Axiom 7 DV fails to boot - schomakr - 05-28-20 02:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication