Raymarine forum / Raymarine Forums / Product Selection Assistance v / New equipment and integration of existing

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New equipment and integration of existing
08-12-16, 02:37 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: New equipment and integration of existing
Lazybones ,

Q1. Does this then mean that I need two Seatalk to Seatalk NG Converters in order to have 5 or less seatalk devices?
A1. Yes.

Q2. If this is the case, additionally there should be no power from the seatalk side and all power would come from the seatalk NG converters?
A2. The SeaTalk to SeaTalkng Converters will joined via an appropriate length of SeaTalkng Backbone Cable. Only one SeaTalkng Power Cable will be used and it will be installed in a Spur socket which will be at the approximate midpoint of the backbone's LEN load.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: New equipment and integration of existing - Chuck - Raymarine - Moderator - 08-12-16 02:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication