Connecting st60 wind, speed and depth to es75

[Chuck - Raymarine - Moderator]

Art,

Per the referenced FAQ, the SeaTalk bus which is presently interfacing your ST60 Instrument Displays (3), ST6001 AP Control Head (1), and autopilot course computer (model not specified), will be branched and connected to a D244 SeaTalk Junction Block using an appropriate length of SeaTalk Cable. The SeaTalk to SeaTalkng Converter Cable supplied with the SeaTalk to SeaTalkng Converter Kit will be used to connect the aforementioned D244 SeaTalk Junction Block the SeaTalk to SeaTalkng Converter's yellow SeaTalk socket. The MFD will be interfaced to the SeaTalk to SeaTalkng Converter via an appropriate length of SeaTalkng Spur Cable. The referenced FAQ addresses powering the SeaTalk to SeaTalkng Converter and also removing power from the currently installed SeaTalk bus.