Raymarine forum / Raymarine Forums / Multifunction Displays v / E78 connection to Uniden Oceanus D VHF-with DSC

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E78 connection to Uniden Oceanus D VHF-with DSC
10-18-16, 08:57 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E78 connection to Uniden Oceanus D VHF-with DSC
Welcome to the Raymarine Forum dmahler,

The NMEA 0183 output leads of the R70414 NMEA 0183 / Video Input Cable would need to be interfaced to the NMEA 0183 input leads of the DSC VHF radio to supply the VHF radio with UTC Time, Latitude, Longitude, SOG, COG, and Date information. The MFD's NMEA 0183 NMEA 0183 PORT 1 would need to be configured to "NMEA 4800". The R70414 NMEA 0183 / Video Input Cable carries signal alone and as such your question concerning powering this cable is not applicable (i.e. no power will be connected to this cable).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: E78 connection to Uniden Oceanus D VHF-with DSC - Chuck - Raymarine - Moderator - 10-18-16 08:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication