Upgrade

[mpo881]

Chuck,

I have a follow up question related to my upgrade now that I have received my HD Digital Open Array Radar.

In the installation instructions, Section 3.8 page 25 it talks about the VCM100 power and grounding requirements. They advise that the VCM100 must be connected to a battery isolator switch or a DC distribution panel. Then in Section 3.11 and 3.12 on page 28 they discuss Circuit Breaker and Fuse ratings as well as sharing a breaker.

So, it would appear to me that I have two options. Using a Battery Isolator to provide power to the VCM100 with either a thermal breaker or fuse in line
or
Share power from an existing breaker (which already has a battery isolator switch in the circuit) and then providing for the appropriate fuse in the leg providing power to the VCM100.

I look forward to your input.