Raymarine forum / Raymarine Forums / Instruments v / Wiring help with installation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring help with installation
03-20-17, 03:47 PM (This post was last modified: 03-20-17 03:49 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Wiring help with installation
Welcome to the Raymarine Forum John,

Your diagram is correct as long as the total spur length is less than or equal to 6m. In order for an i50 Depth/Tridata Instrument to repeat Depth and/or Speed (Temp) data, the instrument must be configured as a Depth Repeater or Speed Repeater respectively. Instructions for configuring the Master / Repeater state may be found within section 6.4 Data master of the i50 Instruments Installation and Operation Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Wiring help with installation - Chuck - Raymarine - Moderator - 03-20-17 03:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication