Raymarine forum / Raymarine Forums / Communications v / Axiom 9 MFD to NMEA0183 VHF radio

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 9 MFD to NMEA0183 VHF radio
07-16-17, 07:30 PM
Post: #7
Dan_Y Offline
Member
***
 		Posts: 70
Joined: Mar 2016
Reputation: 0
RE: Axiom 9 MFD to NMEA0183 VHF radio
Two additional questions about this install shown in the FAQ above...

Q1. Is there a p/n for a cable that connects to the ST1 port on the ST1/STng converter but is bare wire at the VHF NMEA0183 end, or do I need to simply cut the ST1 connector off of the cable supplied with the E22158 converter kit?

Q2. What is the max length of the NMEA0183 wiring between the ST1/STng converter and VHF radio? I'm trying to determine if I have to extend my STng backbone 20 ft to the VHF and have a short NMEA0183 connection with the E22158 STng to ST1 cable (ST1 end cut off), or can I run NMEA0183 cable 20 feet from the converter to the VHF.
Thank You for any help.
Dan
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Axiom 9 MFD to NMEA0183 VHF radio - Dan_Y - 07-16-17 07:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication