The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / ST 2000 not working and not

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST 2000 not working and not
09-28-17, 09:14 AM
Post: #1
skipron Offline
Junior Member
**
 		Posts: 2
Joined: Sep 2017
Reputation: 0
ST 2000 not working and not
displaying on LCD. I have traced the wiring and it is intact. A VOM at Pin 2 (blue) and Pin 1 (brown) of the bulkhead connector reads - 13.3 V. Does this mean that the deck connector was wired backwards and the ST 2000 will not work if connections give a reversed polarity? Is there another way to check this?

The cable from the DC panel has the white wire going to Pin #2 and a black wire going to Pin #1.

The unit is not wired for SeaTalk or any other interface.

The unit is like new and I am not sure it was ever used or found to be working....

Thanks,
Skipron
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST 2000 not working and not - skipron - 09-28-17 09:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication