Raymarine forum / Raymarine Forums / Product Selection Assistance v / e120 with B&G inst, Simrad AP swap to Axiom?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e120 with B&G inst, Simrad AP swap to Axiom?
10-17-17, 12:06 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: e120 with B&G inst, Simrad AP swap to Axiom?
Welcome to the Raymarine Forum DesertBoat,

While Axiom Pro MFDs have a NMEA 0183 communications interface as well as a NMEA 2000 communications interface to support interfacing Raymarine and third party products, the Axiom MFDs only have a NMEA 2000 communications interface. It is certainly possible to adapt the NMEA 0183 devices to communicate via NMEA 2000 with an Axiom MFD using products such as the Actisense NGW-1-ISO. The installation instructions for the Simrad AC42 autopilot claims support for NMEA 2000 communications, permitting it to be interfaced as a spur to the a powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the MFD will also be interfaced as a spur.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: e120 with B&G inst, Simrad AP swap to Axiom? - Chuck - Raymarine - Moderator - 10-17-17 12:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication