[CA] Evolution Auto Pilot Selection

[Rookie Fisherman]

Thanks Ray! & Happy New Year.

Upon looking at the Raymarine/Verado hose kit I realized that it is only the return/low pressure line that is calling for the tee with hose clamps. So not too big a deal but still may have that done by hydraulic shop to eliminate the hose clamps.

So I have a couple more questions and instead of starting a new thread I will ask them here if that is OK.

So here is my set up to start.

2 Axiom 9's at the helm (One with RV and RV100 Transducer)
1 Axiom 7 at the stern
Quantam Radar
All above to be connected through Raynet network switch.

EV-200 AP w/P70rs Control Head (will be connected via SeaTalk to Main Axiom 9)

So my question will I be able to control the AP from the Axiom 7 at the stern as well since it is connected to the Axiom 9 at the helm via the network switch? Or do I need to connect the Axiom 7 to the SeaTalk as well?

Thank you