Adding EV 200 Autopilot

[Steve - Raymarine - Moderator]

I would recommend to change the port that the converter is connected to, you can stay with the Seatalk to Seatalk NG converter, but move it from the Seatalk/Alarm out to the Seatalk 2 port on the E Series Classic MFD. You would move to a white port and disconnect the yellow port connection. You would be using the Seatalk 2 to Seatalk NG spur adapter cable (A06061) to make the connection, and will then extend the Seatalk NG backbone for the Evolution autopilot from the Seatalk to Seatalk NG converter. This will provide additional information for the GPS data and move all data to a Seatalk NG interface which will allow the equipment to communicate properly.

When using the Seatalk 2 interface on the E Series Classic MFD, all Seatalk data should be moved to that interface for proper communication of equipment.