[CA] Dual Axiom Configuration

[Chuck - Raymarine - Moderator]

Blazin,

As you have suggested, use of the Y-Cable would then prevent use of the RV-100's high CHIRP conical sonar. By installing a second Axiom RV MFD or Axiom DV MFD within the network, then it it would indeed be possible to interface the second MFD to either a low profile CPT-S thru-hull transducer or adapt the MFD to use a low profile thru-hull (ex. B60, P319, etc.) or in-hull 50kHz/200kHz transducer (ex. P79, M260, etc.) should the hull material and thickness support use of an in-hull transducer. The higher power output of the 50kHz/200kHz transducer may make it the best option for holding bottom at planing speeds. The operational depth which you have specified should be well within the range of either one of these options.