[CA] [CA11] Airmar b164 and RV-100 on Axiom 7
|
07-05-18, 11:15 AM
(This post was last modified: 07-05-18 03:48 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Airmar b164 and RV-100 on Axiom 7
Good afternoon,
I am trying to install an Airmar b164 (already installed in the boat but not being utilized) transducer to an Raymarine Axiom 7 with an RV-100. Is the correct Y-cable the A80491? Also- would all the functionality from both transducers be maintained with this setup? The reason I want the Airmar b164 installed is to get the readings in deeper water. The RV-100 usually stops reading after I get to over 600 feet. I have a DSM300 also, but from what I have read, this cannot be used with the Axiom. Any help would be appreciated |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-05-18 11:15 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-05-18, 03:50 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-05-18, 06:45 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-06-18, 10:51 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-06-18, 11:56 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-06-18, 12:47 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-13-18, 07:14 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-16-18, 08:11 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 12-27-18, 08:50 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 12-28-18, 10:17 AM
|
User(s) browsing this thread: 1 Guest(s)