[CA11] CP370 No Depths beyond 200 feet

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] CP370 No Depths beyond 200 feet

07-25-18, 01:40 PM (This post was last modified: 07-25-18 01:41 PM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] CP370 No Depths beyond 200 feet

Welcome to the Raymarine Forum mistertj,

Please excuse the delay in this response. It sounds as though there may be an issue with the system using only the 200kHz frequency. Within the Fishfinder Settings menus, have you selected the B744V from the transducer list displayed? Have you tried manually switching from the 200kHz frequency to the 50kHz frequency? If so, what were the results?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] CP370 No Depths beyond 200 feet - mistertj - 07-20-18, 09:59 AM

RE: [CA11] CP370 No Depths beyond 200 feet - Chuck - Raymarine - Moderator - 07-25-18 01:40 PM

RE: [CA11] CP370 No Depths beyond 200 feet - mistertj - 07-25-18, 02:04 PM

RE: [CA11] CP370 No Depths beyond 200 feet - Chuck - Raymarine - Moderator - 07-26-18, 07:55 AM

RE: [CA11] CP370 No Depths beyond 200 feet - mistertj - 07-27-18, 01:44 PM

RE: [CA11] CP370 No Depths beyond 200 feet - Chuck - Raymarine - Moderator - 07-27-18, 03:46 PM

User(s) browsing this thread: 1 Guest(s)