The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / E120 Classic Interface to AIS 650

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 Classic Interface to AIS 650
04-20-16, 12:02 PM
Post: #1
Tim_Dahlin Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2016
Reputation: 0
E120 Classic Interface to AIS 650
I understand that to connect an AIS 650 to an E120 Classic (w/ SW V5.69) I must use the NMEA 0183 interface (38.4k between the E120 and AIS and 4.8k between the AIS and my VHF [Ray215]). I also have a SeaTalkng network connected to the E120. On the SeaTalkng network is an EV-1 autopilot, i70 display and Volvo Penta Converter (for engine data). Since the E120 Classic cannot process AIS PGNs, can I connect the AIS 650 to both the NMEA 0183 and SeaTalkng thus allowing the i70 to display AIS data.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E120 Classic Interface to AIS 650 - Tim_Dahlin - 04-20-16 12:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication