The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] SPX-10 replacement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SPX-10 replacement
08-28-18, 11:22 AM (This post was last modified: 08-29-18 02:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
lkreissl Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2016
Reputation: 0
[CA11] SPX-10 replacement
I have a cruiser with the spx-10 autopilot installed. I have a fluxgate fault and the fluxgate ohms checks good. The auto pilot will not turn off and displays a constant fault on the c-series 125 plotter also.

Rather than sending the components in for repair and the cost entailed, I am thinking of upgrading the system instead of attempting to repair the old one.

Would the ev-150 be a good replacement? Can I use the current type-1 hydraulic drive with it? I also have a smartcontroller remote connected, will it work with the ev-150?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] SPX-10 replacement - lkreissl - 08-28-18 11:22 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication