The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Axiom Pro Radar

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro Radar
08-31-18, 01:13 PM (This post was last modified: 09-13-18 10:17 AM by Chuck - Raymarine - Moderator.)
Post: #1
windquest24 Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2018
Reputation: 0
[CA11] Axiom Pro Radar
I have recently installed a Axiom Pro MFD (with latest software) connected to a 424 digital radar dome. Most of the time when turning on the Radar scanner the Axiom recognizes and connects to the radar. On occasion it fails to connect with a message that states radar not found. If I pull the power fuse for the scanner and immediately put it back in the the radar is found and powers up.
I have checked all wiring (connectors,fuse panel,etc.) and find no issues. I have also confirmed that there is 12.8 volts or more at the fuse .
Once on the Radar works perfectly and does not shut down.
Please advise .
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom Pro Radar - windquest24 - 08-31-18 01:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication