[DG11] Interfacing es128 with NMEA v1.5 equipment

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Interfacing es128 with NMEA v1.5 equipment

10-24-18, 06:44 AM

Post: #4

Derek - Raymarine - Moderator Offline

Administrator

Posts: 1,416
Joined: Nov 2017
Reputation: 9

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment

Hi Alan,

As per the previous diagram we sent, white is the port 1 data input +ve and green is the port 1 data input -ve.

Yellow is port 1 data output +ve and brown is the port 1 data output -ve. You do not leave the brown disconnected. The power lead shield connection is provided for RFi protection purposes and so is only to be used for that purpose.

Thanks
Derek

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Interfacing es128 with NMEA v1.5 equipment - Nandi - 10-22-18, 09:29 AM

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment - Derek - Raymarine - Moderator - 10-23-18, 06:02 AM

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment - Nandi - 10-23-18, 02:59 PM

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment - Derek - Raymarine - Moderator - 10-24-18 06:44 AM

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment - Nandi - 10-24-18, 01:46 PM

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment - Derek - Raymarine - Moderator - 10-25-18, 10:41 AM

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment - Nandi - 10-25-18, 01:20 PM

RE: [DG11] Interfacing es128 with NMEA v1.5 equipment - Derek - Raymarine - Moderator - 10-26-18, 07:57 AM

User(s) browsing this thread: 2 Guest(s)