[CA] [CA11] Fuel readings for individual engines / tanks
|
03-10-19, 03:30 PM
(This post was last modified: 03-11-19 12:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Fuel readings for individual engines / tanks
Background:
Using a dedicated A68, set up 2 x 300hp Suzuki engine interfaces using a N2K network. All works great, got all the engine data I need. Using the Raymarine Fuel manager, it only asks for total fuel capacity. In the DATA screen and under FUEL, when customising, you can select Fuel remaining Tank 1 and Tank 2. Can you use these fields with an engine interface, or are these designed for fuel tank sensors / senders? How do I set initial capacity and assign, for example Tank 1 to Port Engine? As they will only show % remaining, I think they may only be for senders, but thought I would check. Cheers Adam |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Fuel readings for individual engines / tanks - Madwill - 03-10-19 03:30 PM
RE: [CA11] Fuel readings for individual engines / tanks - Chuck - Raymarine - Moderator - 03-11-19, 12:57 PM
|
User(s) browsing this thread: 1 Guest(s)