Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] i40 depth gauge

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] i40 depth gauge
04-08-19, 03:18 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] i40 depth gauge
Luther,

Raymarine's a/c/e/eS-Series MFDs are neither designed to be powered by their communications interfaces, nor to supply power to devices which have been connected to their communications interfaces. Please click here to view a FAQ addressing power circuits for marine electronics. If installed as recommended the i40 instrument will be powered from the system's SeaTalkng / NMEA 2000 backbone via a SeaTalk to SeaTalkng Converter. In such situations, switching power OFF to the i40 would require that the circuit supplying power to the system's SeaTalkng / NMEA 200 backbone be switched OFF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] i40 depth gauge - Luther - 04-04-19, 04:39 PM
RE: [CA11] i40 depth gauge - Chuck - Raymarine - Moderator - 04-08-19 03:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication