Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade E120 questions
05-14-19, 09:27 AM
Post: #10
RE: [CA11] Upgrade E120 questions
Wdeertz,

Each of Raymarine's IP marine cameras have been terminated with a male RJ45 plug. A weatherproof coupler is packed with these cameras. An appropriate length of marine grade CAT6 patch cable (RJ45 (M) plugs on each end) would be used to interface the coupler to a PoE injector. If interfacing the camera to the POE port of an Axiom XL MFD, then an appropriate length of RayNet (F) to RJ45 (M) Cable would be used to interface the coupler to one of the Axiom XL MFD's PoE ports.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Upgrade E120 questions - Wdeertz - 05-06-19, 10:53 AM
RE: [CA11] Upgrade E120 questions - Chuck - Raymarine - Moderator - 05-14-19 09:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)