[CA] [CA11] P70s Task fail - inconsistant values
|
06-06-19, 12:22 PM
(This post was last modified: 06-06-19 12:23 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] P70s Task fail - inconsistant values
Welcome to the Raymarine Forum Pete,
With respect to the diagram which you have provide, it is recommended that the 12V power feed to the ST60 instruments shown within your diagram be removed, as it may result in a ground loop. The SeaTalk bus should be powered from the SeaTalkng /NMEA 2000 backbone via the SeaTalk to SeaTalkng Converter. Next, please respond with the versions of software within the MFD, Evolution autopilot components, and SeaTalk to SeaTalkng Converter (HOME->SETTINGS->NETWORK->DIAGNOSTICS->PRODUCT INFO). |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] P70s Task fail - inconsistant values - peter warm - 06-06-19, 04:04 AM
RE: [CA11] P70s Task fail - inconsistant values - Chuck - Raymarine - Moderator - 06-06-19 12:22 PM
RE: [CA11] P70s Task fail - inconsistant values - peter warm - 06-14-19, 08:17 AM
RE: [CA11] P70s Task fail - inconsistant values - Chuck - Raymarine - Moderator - 06-17-19, 10:23 AM
RE: [CA11] P70s Task fail - inconsistant values - peter warm - 07-23-19, 04:06 AM
RE: [CA11] P70s Task fail - inconsistant values - Chuck - Raymarine - Moderator - 07-23-19, 03:46 PM
RE: [CA11] P70s Task fail - inconsistant values - peter warm - 07-24-19, 06:11 AM
RE: [CA11] P70s Task fail - inconsistant values - Chuck - Raymarine - Moderator - 07-24-19, 07:31 AM
|
User(s) browsing this thread: 1 Guest(s)