Raymarine forum / Raymarine Forums / Fishfinders v / [DG] [DG11] DSM300 issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] DSM300 issues
06-25-19, 09:45 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] DSM300 issues
Hi Manuel,

Thank you for your enquiry

Is there a warning displayed on the E120? for example no Data source? If yes, then the problem is communications between the E120 classic and the DSM300, could be a damaged cable, poor connection or maybe fault I/O interface inside the DSM300 or the E120 - in which case the DSM or the E120 will need to be returned to our service workshops for investigation and repair.

Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] DSM300 issues - Manuel - 06-24-19, 09:17 AM
RE: [DG11] DSM300 issues - Derek - Raymarine - Moderator - 06-25-19 09:45 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication