Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Classic E80 Series mounting gasket

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Classic E80 Series mounting gasket
08-07-19, 01:36 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Classic E80 Series mounting gasket
Welcome to the Raymarine Forum distand,

Raymarine provides surface mount gaskets which are manufactured from neoprene. Silicone or similar sealants would not typically be recommended as a substitute for the supplied gaskets, primarily because the such sealants can very difficult to remove and may damage plastic parts. I found this relatively inexpensive neoprene sheet from Grainger during a quick search of the Internet.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Classic E80 Series mounting gasket - Chuck - Raymarine - Moderator - 08-07-19 01:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication