Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Depth Sounder shows 0.0 then ---
10-07-19, 09:49 AM
Post: #7
RE: [CA11] Depth Sounder shows 0.0 then ---

Q1. Can I replace the existing Speed Pod E22069 with a newer E22107?
A1. Yes.

Q2. If I replace the pods with the ITC-5 do I have to have the full length cables from the sensors themselves? Most of them have been cut to length and it will be difficult to extend them to the required length or expensive to replace them, just to have the right length cable.
A2. With the exception of analog depth transducers, analog instrument transducer cables may cut and then spliced back together It is recommended that wind transducer cable lengths not exceed one hundred feet. Raymarine does not sell extension cables for analog instrument transducers.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA11] Depth Sounder shows 0.0 then --- - Chuck - Raymarine - Moderator - 10-07-19 09:49 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)