Raymarine forum / Raymarine Forums / Multifunction Displays v / Transfering waypoints from E80 Classic to eS127

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transfering waypoints from E80 Classic to eS127
06-21-17, 01:17 PM
Post: #1
RobATX Offline
Junior Member
**
 		Posts: 5
Joined: Jun 2017
Reputation: 0
Transfering waypoints from E80 Classic to eS127
Hello,

I recently purchased an eS127 and I would like to know the most efficient way to transfer the waypoints I currently have on my E80. I also have them stored on RayNav software on my computer.

Secondly, I would like to know what chart I need to load so that I have the high definition bottom structure imagery while navigating that I have seen on my friend's boat with Raymarine MFD's. I fish in the Gulf. Does it come pre-loaded or do I need to buy a chart? It will be a welcome change from the E80's white background.

Any other tips for transitioning to the new generation MFD's would be greatly appreciated.

Rob
Find all posts by this user
Quote this message in a reply
06-22-17, 09:15 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Transfering waypoints from E80 Classic to eS127
Welcome to the Raymarine Forum Rob,

Q1. I recently purchased an eS127 and I would like to know the most efficient way to transfer the waypoints I currently have on my E80. I also have them stored on RayNav software on my computer.

A1. Please click here to view a FAQ addressing this subject.

Q2. I would like to know what chart I need to load so that I have the high definition bottom structure imagery while navigating that I have seen on my friend's boat with Raymarine MFD's. I fish in the Gulf. Does it come pre-loaded or do I need to buy a chart? It will be a welcome change from the E80's white background.

A2. Please click here to view a FAQ addressing this subject.

Q3. Any other tips for transitioning to the new generation MFD's would be greatly appreciated.
A3. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
06-26-17, 07:57 AM
Post: #3
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Transfering waypoints from E80 Classic to eS127
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication