Raymarine forum / Raymarine Forums / Multifunction Displays v / E80 Depth Contours Missing

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E80 Depth Contours Missing
09-06-17, 10:09 PM
Post: #1
tholley55 Offline
Junior Member
**
 		Posts: 23
Joined: Jun 2016
Reputation: 0
E80 Depth Contours Missing
Hi, My depth contours have gone missing. I've tried all the settings under chart cartography with no success. Any suggestions on how to get this working would be much appreciated.

Thanks, Tim
Find all posts by this user
Quote this message in a reply
09-12-17, 03:51 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E80 Depth Contours Missing
Welcome to the Raymarine Forum Tim,

Should the MFD still support displaying tide and current data, then the MFD's memory card reader and chart card would be deemed to be operational. If so, then it would be recommended that a SYSTEM SETTINGS RESET be commanded to address the reported problem.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication