European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Seatalk set up
|
|
04-06-16, 04:41 PM
Post: #1
|
|||
|
|||
|
Seatalk set up
The system
newest digital radar autopilot pump and actuater switch av 100 gps fishfinder monitor c series It came as part kit Included ev1 backbone kit I installed the spur adapter with split wires to av100 does this power the backbone?? The book says no? I also hooked up the red /black spur power wire to backbone. Is this redundant? Thanks for your help aloha |
|||
|
|
04-06-16, 06:20 PM
Post: #2
|
|||
|
|||
|
RE: Seatalk set up
Welcome to the Raymarine Forum Dan,
Unlike the ACU200 and ACU400, the ACU100 is not designed to supply power to a SeaTalkng backbone. As such, the SeaTalkng Power Cable must be installed and connected to a switched 12VDC power circuit and protected with a 5A fuse/breaker. |
|||
|
|
|
04-06-16, 06:56 PM
(This post was last modified: 04-07-16 09:27 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: Seatalk set up
Thanks Chuck,
You guys (and ladies) are sure very helpful and we appreciate you. Why does it have a split 5 wire to spur cable plug in than?on the acu 100? aloha Dan |
|||
|
|
|
04-07-16, 08:16 AM
(This post was last modified: 04-07-16 08:16 AM by Steve - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
|
RE: Seatalk set up
The reason for the split Seatalk NG spur cable is the ACU-100 has a bare wire terminal strip installation for the Seatalk NG port. The terminal strip is color coded.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 3 Guest(s)