Raymarine forum / Raymarine Forums / Instruments v / Splicing Seagalk NG cables

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Splicing Seagalk NG cables
11-11-17, 07:21 PM
Post: #1
mlaver Offline
Junior Member
**
 		Posts: 13
Joined: Feb 2016
Reputation: 0
Splicing Seagalk NG cables
I'm in the process of upgrading my wind, speed, and depth instruments and eventually my autopilot. I would like to replace the Seatalk 1 cable that currently feeds my NavPod with a SeatalkNG spur cable. However, the conduits are already stuffed and I suspect I'll have to cut the connector of the STng cable to pull it through.

Can STng spur cables be cut and re-spliced? Thanks.

- Mick
Find all posts by this user
Quote this message in a reply
11-13-17, 12:51 PM (This post was last modified: 11-13-17 12:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Splicing Seagalk NG cables
Mick,

Yes. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication