Raymarine forum / Raymarine Forums / Multifunction Displays v / C90W and AIS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C90W and AIS
11-20-17, 10:02 AM
Post: #1
BobHorn Offline
Junior Member
**
 		Posts: 9
Joined: Feb 2016
Reputation: 0
C90W and AIS
Looking at a boat with a C90W plotter, is that unit compatible with an AIS transceiver using 38400 BAUD?
Thanks,
Bob
Find all posts by this user
Quote this message in a reply
11-20-17, 10:34 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: C90W and AIS
Welcome to the Raymarine Forum Bob,

The C-Series Widescreen MFDs will accept communications from an AIS receiver or transceiver via either its SeaTalkng (NMEA 2000) communications interface or its 38400 BAUD NMEA 0183 communications interface. If seeking a Raymarine AIS receiver or transceiver, then the AIS350 or AIS650 respectively would be recommended. Raymarine also offers VHF radios having internal AIS receiver circuitry (ex. Ray70 and Ray260).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication