Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Axiom 9 snail trail/tides/fuel meter.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 9 snail trail/tides/fuel meter.
12-29-17, 12:27 AM (This post was last modified: 12-29-17 10:20 AM by Chuck - Raymarine - Moderator.)
Post: #1
Reverie Offline
Junior Member
**
 		Posts: 3
Joined: Dec 2017
Reputation: 1
[CA] Axiom 9 snail trail/tides/fuel meter.
Hi

Where can I find the option in the chartplotter to leave a trail/breadcrumbs on the screen so I can better see my drifts while fishing?

Thanks in advance.
Find all posts by this user
Quote this message in a reply
12-29-17, 10:19 AM (This post was last modified: 12-31-17 01:30 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Axiom 9 snail trail/tides/fuel meter.
Welcome to the Raymarine Forum Reverie,

From within the Chart application, the command sequence MENU->WAYPOINTS, ROUTES, TRACKS->TRACKS->START TRACK may be used to start a track. More information concerning the Tracks feature may be found within Section 7.3: Tracks of the LightHouse 3.3 Advanced Opeartion Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication