[CA] [CA11] i70 versus i50 for ST60+ Upgrade

[Dan_Y]

I’m contemplating replacing my aging ST60+ depth and speed instruments, incorporate an ITC-5 for better speed calibration, and maintain a large-number, dedicated display for each data type.

Is there a version of the i50 that is “display-only, without the transducer interfaces versus using i70s as dedicated displays?
Thanks,
Dan

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Dan,

The i50 and i60 Instruments may be purchased with or without a transducer(s). When not interfaced to a transducer, these instruments may repeat instrument data from the system.

[Dan_Y]

Chuck -
Okay, thanks Chuck. I was just wondering if there was a simple, “display-only” p/n of the i50s without the transducer interface electronics.
Dan

[Chuck - Raymarine - Moderator]

Dan,

Raymarine does not offer display only versions of the i50 instrument, as this function is performed by the i70S MFID.

[Dan_Y]

Thanks for the clarification Chuck. Dan

[Chuck - Raymarine - Moderator]

You're welcome.